Construction Debris Removal Services

Professional C&D waste removal including concrete, brick, dirt, and building materials

Same-day service available

Handle concrete, brick, and dirt

C&D recycling when possible

Fast service for contractors

Typical Price Range
$200-$1500
per job

Popular Construction Debris Removal Searches

construction debris removalconstruction cleanup

Comprehensive C&D Waste Removal

Fast, professional construction and demolition debris removal for contractors, builders, and homeowners.

Materials We Handle: Concrete, brick, asphalt, dirt and soil, lumber and wood, drywall and sheetrock, roofing materials (shingles, tiles), siding and windows, doors and trim, flooring materials, metal scraps, insulation, fixtures and hardware.

Project Types: New construction, home renovations, commercial builds, demolition projects, roofing jobs, basement finishing, kitchen/bathroom remodels, deck removal, garage demolition.

Service Options: Same-day pickup available, roll-off dumpster rental, load-and-go truck service, scheduled pickups, bulk removal, sorting and recycling.

C&D Recycling: 60-90% of C&D materials can be recycled. Concrete → crushed for aggregate. Wood → mulch or biomass fuel. Metal → scrap recycling. Drywall → new drywall. Asphalt → road base. Brick → reuse or aggregate.

Pricing & Cost Factors

Pricing Models: Per load: $200-$600 per truck load. Per cubic yard: $40-$100 per yard. Per ton: $50-$150 per ton. Hourly: $100-$200 per hour (includes labor and disposal).

Dumpster Rental: 10-yard: $300-$500. 20-yard: $400-$700. 30-yard: $600-$900. 40-yard: $800-$1,200. Usually includes 7-14 day rental, delivery, pickup, weight allowance, disposal fees.

What Affects Cost: Material type (concrete heavier = more expensive), volume and weight, contamination (mixed loads cost more), distance to disposal, location (urban vs. rural), timeline (rush service = premium).

Cost Savings Tips: Separate materials (concrete-only cheaper than mixed), fill containers efficiently, avoid prohibited items (causes rejection fees), schedule during off-peak times, compare dumpster vs. truck service for your project.

Additional Fees: Overage fees ($50-$100 per ton over limit), extended rental ($5-$15/day), permit fees for street placement ($50-$100), contamination surcharges, hard-to-access locations.

C&D Recycling & Environmental Impact

C&D Waste Statistics: 600 million tons of C&D debris annually in US. Largest waste stream by weight. 2x more than municipal solid waste. 25-40% of total solid waste.

Recycling Rates: National average: 60-70% C&D recycling rate. Top states (California, Massachusetts): 75-85%. Concrete/asphalt: 80-90% recycling. Wood: 40-60% recycling. Metal: 90-95% recycling.

Concrete Recycling: Crushed into various sizes. Road base and aggregate. Landscaping rocks. Erosion control. New concrete production (replaces virgin aggregate). Prevents 480+ lbs CO2 per ton vs. virgin material.

Wood Recycling: Clean wood → mulch, animal bedding, biomass fuel. Painted/treated wood → biomass fuel only (not mulch). Reclaimed lumber → reuse in building. 1 ton recycled wood saves 3 cubic yards landfill space.

Metal Recycling: Steel, aluminum, copper, brass all recyclable. Melted down for new products. Steel recycling saves 75% energy vs. virgin production. Copper recycling saves 85% energy.

Drywall Recycling: Ground into powder. Blended into new drywall. Soil amendment (gypsum). Compost additive. Prevents landfill problems (hydrogen sulfide gas).

Asphalt Recycling: Crushed and screened. Hot mix asphalt production. Road base material. Temporary roads. Parking lots. 99% of asphalt is recyclable.

Landfill Diversion Benefits: Conserves landfill space. Reduces mining of virgin materials. Lowers greenhouse gas emissions. Creates recycling industry jobs. Often costs less than landfill disposal.

Preparing C&D Debris for Removal

Sorting Materials: Separate concrete from wood from metal. Pre-sorted loads cheaper to dispose. Concrete-only loads: cheapest disposal. Mixed loads: most expensive (sorting fees).

Size Reduction: Break concrete into manageable pieces (2-3 feet max). Cut lumber to 4-6 foot lengths. Flatten cardboard and packaging. Reduces volume = lower cost.

Remove Contaminants: No household trash in C&D loads. No food waste or garbage. Remove nails from wood when possible. Drain fluids from equipment. Clean debris loads faster/cheaper disposal.

Access Preparation: Clear path for trucks/dumpsters. Overhead clearance (14+ feet for roll-off). Level ground for dumpster placement. Street parking permits if needed. Notify neighbors if blocking access.

Safety Measures: Wear gloves and safety glasses. Watch for protruding nails. Lift properly (bend knees). Use ramps to load heavy items. Keep work area organized.

Loading Tips: Heaviest items on bottom. Distribute weight evenly. Break down large pieces. Fill voids with smaller debris. Don't overload (materials can't extend above container edge).

Prohibited Items: Hazardous waste (paint, chemicals), asbestos-containing materials, lead-based paint debris (pre-1978), underground storage tanks, tires, batteries, appliances with Freon, contaminated soil.

Regulations & Permit Requirements

Building Permits: Most construction/demolition requires building permits. Permit includes waste management plan. May require proof of proper disposal. Keep disposal receipts for permit closeout.

C&D Recycling Mandates: Many states/cities require minimum C&D recycling rates. California: 65% diversion required (CalGreen). Massachusetts: Commercial projects must recycle. LEED projects: 50-75% diversion for certification.

Asbestos Regulations: Pre-1980 buildings may contain asbestos. Inspection required before demolition. Licensed abatement contractors only. EPA notification required 10 days before demo. Penalties: $25,000/day for violations.

Lead Paint: Homes built before 1978 likely have lead paint. EPA RRP Rule requires certified renovators. Lead-safe work practices. Dust testing. Proper disposal of lead debris. Fines: $37,500 per violation.

Stormwater Management: Construction sites over 1 acre require NPDES permit. Stormwater Pollution Prevention Plan (SWPPP). Erosion and sediment controls. C&D debris must be secured (prevents washoff).

Street Permits: Dumpster on public street requires permit ($50-$150). Traffic cones or barricades may be required. Time limits (often 7-14 days max). Permit must be visible on dumpster.

Weight Limits: DOT truck weight limits (80,000 lbs gross). Overweight tickets and fines. Concrete loads are heaviest (plan accordingly).

Tips for Contractors & DIYers

Right-Sizing Dumpsters: Kitchen remodel: 10-15 yard. Bathroom remodel: 10 yard. Roofing (1,500 sq ft): 20 yard. Full home demo: 30-40 yard. Garage demo: 20-30 yard. Deck removal: 10-20 yard (depending on size).

Dumpster vs. Truck Service: Dumpster better for: Multi-day projects, need flexibility on timing, generate debris over time, larger volumes (10+ cubic yards). Truck service better for: One-day cleanups, debris all ready to go, smaller volumes, don't want dumpster sitting on property.

Scheduling Strategy: Order dumpster day before demo starts. Schedule pickup as soon as full (save rental fees). Have backup plan if project delayed. Don't let dumpster overflow (rejection fees).

Protecting Property: Use plywood under dumpster wheels (protects driveway). Don't overfill (spillage damages property, fines). Tarps over debris (prevent windblown mess). Sweep around dumpster daily.

Working with Disposal Facilities: Build relationships with transfer stations. Know what each facility accepts. Understand pricing structures. Pre-sort for best rates. Keep disposal receipts (tax deductions, permit closeout).

Cost Control: Bid disposal into project estimates. Track actual costs vs. estimates. Improve sorting to reduce disposal costs. Negotiate rates with regular haulers. Plan demo to minimize waste generation.

DIY Homeowner Tips: Rent dumpster from reputable company. Get clear pricing (no hidden fees). Know what's prohibited. Don't let friends use your dumpster (overages). Consider demolition vs. deconstruction (salvage materials = less waste).

Safety First: Never climb inside dumpster. Don't overfill (unstable loads = accidents). Keep children away. Close lids when not in use. Secure loose debris (wind hazards).

Frequently Asked Questions

How much does construction debris removal cost?

Truck loads: $200-$600 per load. Dumpster rental: $300-$1,200 depending on size (10-40 yards). Per ton: $50-$150. Concrete-only loads cheaper ($40-$80/ton). Mixed C&D: $80-$150/ton. Same-day service available. Costs vary by location, material type, and volume.

Can I mix different materials in one dumpster?

Yes, but pre-sorted loads cost less. Concrete-only: cheapest disposal. Wood-only: moderate cost. Mixed C&D: most expensive (sorting fees). Avoid mixing prohibited items (hazardous waste, asbestos). Pre-sorting can save 20-40% on disposal costs.

How much does a cubic yard of debris weigh?

Varies by material: Concrete: 3,000-4,000 lbs/yard. Asphalt: 3,000-4,000 lbs/yard. Brick: 2,500-3,000 lbs/yard. Wood: 300-600 lbs/yard. Drywall: 500-700 lbs/yard. Dirt: 2,000-2,500 lbs/yard. Roofing shingles: 2,000-3,000 lbs/yard. Plan dumpster size accordingly.

What construction materials can be recycled?

60-90% of C&D materials recyclable. Concrete/asphalt (80-90%), metal (90-95%), wood (40-60%), drywall, cardboard, brick, and clean fill dirt. Painted wood can be biomass fuel but not mulch. Pre-sorting increases recycling rates and lowers costs.

Do I need a permit to rent a dumpster?

Depends on placement. Private property (driveway): Usually no permit. Public street: Permit required ($50-$150), time limits apply (7-14 days typical). HOA property: Check HOA rules. Commercial property: Check with property manager. Permit must be visible on dumpster.

Ready to Get Started?

Find verified construction debris removal providers in your area

Select Your State